by Marci Nielsen
Every fiberglass has a gel coat. Even though this is not significant in terms of its structure, it does offer the product protection from harsh conditions. Besides this, it gives it a shiny appearance and color. More details on how to restore faded fiberglass are given below.
Over time, the conditions the product is exposed to cause the outer layer to fade. The resulting product looks chalky and also dull. Nevertheless, this situation can be quickly fixed. You should start the restoration process by cleaning the surface. If you can get hot water then you should use it in this process. A sponge for scrubbing is also needed. Ensure you have a detergent. Some of them are corrosive and you ought to use protective gear.
Mildew can cause a lot of damage. However, it is not easy to eliminate it. Thus, you should pour some bleach on it. The stubborn stains can be done away with by directly applying the concentrated cleaner on them. Careful rinsing is emphasized to remove all traces of the cleaning detergent. The surface should be dried afterwards.
For better results, all oil should be removed from the item. Not all detergents succeed in accomplishing this. Acetone or MEK should be used for this purpose. However, it is advisable to use a microfiber cloth to apply it. Direct application is discouraged. You may need several of them because you have to discard it once they are covered up with grease. The next step is to wax the item. This can prolong its life.
You will have to follow the instructions of your manufacturer carefully. Remember that not all waxes have the same procedure of application. However, you will need a cloth in waxing. Circular motions are encouraged. Wait until the wax is dry to buff the extra. You need a special cloth for this task.
Polishing follows waxing. Abrasives are needed for this task. Fine sandpaper is recommended. All pitted spots will be made smooth. Coating alone cannot achieve this. Dividing the surface in sections and tackling each at a time is advisable. Ensure you move in circles all the time. You ought to only stop when you can see your own image on the particular surface. Remember to apply a fresh coat of wax afterwards. Some polish preparations have wax.
If the surface has been eroded extensively, you should get a better abrasive. Before applying fresh wax, you ought to do away with the old one. If you ignore this, the particular surface will not be even. Straight strokes are preferred. There are several solutions that can be utilized for this process. However, toluene is more common.
A restorer should be applied last. There are a lot of them meaning you will not have a difficult time shopping for one. They work almost the same as wax. Nonetheless, buffing is recommended after the restorer has being applied. You will be impressed with the results. However, remember that the item will not retain the new look forever. However, it will last for some time if you take care of it well.
About the author:
Read more about Concerning How To Restore Faded Fiberglass.